Added to Cart
The Smart-Base™ Electronic Programmable Inbuilt Baseboard Thermostat
Easily update your Cadet F Series electric baseboard with a heater mounted, electronic programmable thermostat!
Features and Benefits
- Improve your comfort level of your Cadet baseboard heat, without having to install a wall thermostat.
- Save up to 28% on your heating bill
5-1-1 programmable thermostat with 4 daily programs - Precise 2ºcomfort range with digital temperature sensing
- Convenient push-button control
- Digital display screen for easy viewing.
- Mounts to 208/240 volt Cadet "F" Series electric baseboard heaters only
- Easy to install for new or replacement use
General Information
Save up to 28% on your heating bill with the SMART-BASE™ electronic programmable thermostat, designed specifically for Cadet “F” Series electric baseboards.
Digital temperature sensing provides a precise 2º comfort range, ensuring constant comfort. 5-1-1 programming allows you to create a heating schedule specific to your needs, for weekdays, Saturday, and Sunday. Convenient push button controls make this thermostat easy to program.
The SMART-BASE™ Electronic thermostat can be installed on either end of standard Cadet 208/240 volt baseboards and is available only in double pole.
Setpoint range: 41ºF to 86ºF (5ºC to 30ºC)
Ordering
- Use with 208/240 volt Cadet F Series electric baseboard heaters.
- Available in White & Almond
Available Models:
| Model# | Description | Price | QTY | Add to Cart | ||||||
| SBFT2W | Smart-Base™ Thermostat Kit Retail Pack DP, 12.6A White | $67.99 | ||||||||
| SBFT2A | Smart-Base™ Thermostat Kit Retail Pack DP, 12.6A Almond | $67.99 | ||||||||
Architectural Information:
The SMART-BASE™ electronic thermostat shall be UL Listed. Designed to be an integral part of the Cadet “F” series baseboard. The control shall be capable of switching up to 12.6 amps, of a resistive load, at 240 or 208 VAC. Control designed to meet power surges normally found in homes. Separate single pole double throw switch included in control for separation of branch circuit from control and heater. Control shall be digital with an LCD display. After programming, LCD display will show the actual room temperature, current time of day, day of week, mode, and current status of heater. Programming of microprocessor accomplished through the use of the three buttons on the control faceplate. Control shall have "Auto Mode" consisting of 5-1-1 programming, four events for Monday through Friday and four events each for Saturday and Sunday. Control shall have a “Manual Mode” for continuous 24-hour control of a single temperature set point. No batteries are required, as the program will be maintained in memory for approximately ten years without power. Only the time and day are required to be re-entered after a power outage.