Added to Cart
The Com-Pak Max - Refurbished
The professional's choice for smaller areas
Features and Benefits
- Primary and Secondary Thermal Safeguards
- High temperature manual reset
- Over temperature one-time thermal device - Horizontal or vertical grill mounting options
- Durable steel tube and plate constructed
heating element - Powder coat paint process eliminates sharp metal edges
- Wall can designed for ease of installation
General Information
-The ComPak Max heater assembly can be used to replace C or CS model
units of like wattages.
-Multi-watts: select your desired wattage with a wiring change prior to
installation, following the included instructions.
The Com-Pak Max provides all the benefits of our popular Com-Pak Plus, but features more durable components and increased versatility. This multi-watt heater is perfect as a single unit for smaller areas such as a bathroom or small bedroom, or as multiple units for larger areas such as a master bedroom, living room or family room. Choose from a vertical grill with the option of a built-in thermostat, or a horizontal, register style grill without a built-in thermostat, to suit your project needs. Cadet recommends a wall-mounted thermostat for optimum performance.
*Views shown below require horizontal mounting, using the register style grill and models without a built-in thermostat. If vertical mounting is preferred, use model CGA or CGW.
Ordering
Need help choosing the right wattage?
Click Here for Heat Selection Tips »
- The heater assembly, Com-Pak Plus grill and Com-Pak Max register style grill are all separate components and shall be ordered separately.
- Suffix “T” in model number denotes built-in single pole thermostat. Model numbers without a “T” require a thermostat.
- Recommended for elevations under 7500 feet.
- Available in white or almond.
- May replace C or CS model units of like wattages.
- Limited to stock on hand.
Rough In Dimensions:
Horizontal Mount - 10.25"W x 8"H x 4"D
Wall Can Dimensions:
Horizontal Mount - 11.5"W x 7.875"H x 4"D
Product Dimensions:
Horizontal grill – 12"W x 9"H
Available Refurbished Models:
| Model# | Description | 240V | Watts 120V | 208V | 240V | Amps 120V | 208V | Price | QTY | Add to Cart |
| CM162-R | Heater Assembly Only – No Thermostat | 700/ 900/ 1600 | 525/ 675/ 1200 | 2.92/ 3.75/ 6.67 | 2.52/ 3.25/ 5.77 | $62.00 | ||||
| CM162T-R | Heater assembly only w/Thermostat | 700/ 900/ 1600 | 525/ 675/ 1200 | 2.92/ 3.75/ 6.67 | 2.52/ 3.25/ 5.77 | $67.00 | ||||
| CM202-R | Heater Assembly Only - No Thermostat | 500/ 800/ 1200/ 1500/ 2000 | 375/ 600/ 900/ 1125/ 1500 | 2.08/ 3.33/ 5.0/ 6.25/ 8.33 | 1.80/ 2.88/ 4.33/ 5.41/ 7.21 | $62.00 |
[+]image
Architectural Information:
Fan forced electric air heaters shall be dual rated from 208V to 240V. The painted wall mounting can for this heater is made from 20-gauge sheet steel with six electrical knockouts and 34 cubic inches for a wiring compartment. Each complete heater shall be of unitized construction and attach to the wall can with a single screw and shall be self-contained and completely separate from the wall mounting can. Element construction is a coiled nichrome heating wire sealed in a steel sheath with steel fins brazed to the sheath. Heating unit shall include a 16-amp rating at 240V, high temperature manual reset limit switch and a 25 amp over temperature thermal backup. A two stage centrifugal blower shall be driven by an impedance protectedmotor. The motor shall be totally isolated from the heating chamber. Metal grills shall be of one piece, constructed of 22-gauge steel and finished with a powder coat paint system.
Technical Information:
The wall can and the Com-Pak Max heater assembly may be installed vertically or horizontally. The Com-Pak Plus grill may be installed vertically or horizontally. The Com-Pak Max register style grill may only be installed horizontally. The (vertical installation) Com-Pak Max may be ordered with or without a built-in thermostat. For optimal comfort use a Cadet electronic thermostat or a dual diaphragm thermostat. Fan heaters and thermostats work best when installed on an inside wall. UL requires heater to be placed a minimum distance of 6” from adjacent surfaces and 4.5” from the floor. Manufacturer recommends installation 12” from all surfaces. A 3’ minimum clearance is recommended for furniture or other objects placed directly in front of heater. Not approved for ceiling mount.
NOTE: Manufacturer recommends installing heater assembly after walls are finished. However, if installation is necessary before walls are finished, use the paint mask provided. Heater must be cleaned every six months minimum. Model CM162 is UL Listed, and models CM202 & CM208 are ETL approved.